Archives For diamond jewellery

Advice on Platinum and White Gold

mcc —  November 21, 2013

Here at Jewellery Latest we know Platinum and White Gold are incredible popular. If you are getting an engagement ring, wedding ring or jewellery you want to pick the best you can get for you money. So which is better; Platinum or White Gold?

 

For diamond rings we would generally advise a customer to purchase a platinum ring, however if the potential budget is below say £1000.00 it may be worth considering white gold which will then allow more emphasise to be put on diamond quality etc and not on the precious metal the ring is made from.  Modern white gold alloys have improved greatly over recent years with the newer metals having a much whiter appearence in their raw state, this is improved with a rhodium plating which Robert Adair Jewellers can re apply at any stage for a minimal charge.

 

Not only is Platinum the most valuable of all the precious metals, but it is one of the hardest and most durable.

 

Unlike white gold, platinum is a white metal through and through and even when it goes dull through wear, Robert Adair Jewellers have the facilities to have it re-polished as new.  So if you are considering a diamond ring then look for platinum.   For more advice and a selection of Platinum and White Gold Jewellery visit Robert Adair Jewellers in Mill Street, Ballymena.

adiars-300x225     adairs

Get advice instore from Stuart Adair of Robert Adair Jewellers.
Platinum – White Gold – Robert Adair Jewellers – Mill Street Ballymena
In Diamonds, Rings, Uncategorized , , , , , , , ,
permalink

How to choose a Diamond

mcc —  September 19, 2013

Jewellery latest have been offering advice on how to buy a diamond. There a four categories which ave been written about here and here.

The final category is Carat weight.

Carat Weight
A carat is the unit by which a diamond is measured. With diamonds bigger is indeed better but mainly because large diamonds are much less common than small diamonds. Large diamonds are much more expensive than smaller ones. Here are some hints to help you decide what size of diamond to buy.

  • Determine your budget.
  • Deciding on carat size is really about striking a balance between size and quality. If you are looking for a larger stone you may need to compromise on the clarity and cut in order to make it affordable and vice versa.
  • Try on different sizes and see what suits best. If it is a diamond ring, slender fingers make a diamond look bigger. Your jeweller can offer you advice.
  • Think about what sort of setting will hold the diamond. You’ll have to be sure that the setting you choose is made to fit the carat weight of your diamond.

There is also a Fifth C when you are serious about buying diamonds, Certificates. A grading report or diamond certificate should be available to allow you to make sure you have bought the right diamond for you.
Whether it is a gift, heirloom or for you engagement or wedding, Robert Adair Jewellers can help you find your perfect diamond.

We are located at Diamond House, 47-51 Mill Street, Ballymena.

adiars-300x225     adairs

Visit the Robert Adair Jewellers showroom at Mill Street in Ballymena.

In Diamonds, Rings, Uncategorized , , ,
permalink

How to choose a Diamond

mcc —  September 13, 2013

Jewellery Latest offer advice on how to spot a good diamond. Cut is the most important factor as discussed here.

The “four Cs” of diamonds which are considered the most important grades and categories:

  • Cut
  • Clarity
  • Colour
  • Carat weight

Clarity

Because Diamond is a natural substance it can form with flaws, blemishes or inclusions. For the best diamond it should have as few flaws a as possible. The number and size of inclusions or blemishes can effect the grade of the diamond. Most flaws are invisible to the naked eye but can stop light from reflecting perfectly off the cut surfaces of the diamond. Diamonds are graded for clarity under 10x loupe magnification.

  • F
    Flawless: No internal or external flaws. Extremely rare.
  • IF
    Internally Flawless: no internal flaws, but some surface flaws. Very rare.
  • VVS1-VVS2
    Very Very Slightly Included (two grades). Minute inclusions very difficult to detect under 10x magnification by a trained gemologist.
  • VS1-VS2
    Very Slightly Included (two grades). Minute inclusions seen only with difficulty under 10x magnification.
  • SI1-SI2
    Slightly Included (two grades). Minute inclusions more easily detected under 10x magnification.

Richard Burton famously gave Elizabeth taylor an internally flawless diamond in a ring setting called the Krupp Diamond.

diamond-thief-4

While most of us could never buy a flawless diamond, a good jeweller should ensure that we get the best graded stone for our money. Robert Adair Jewellers can help you to buy the best diamond. Jewellery should be an investment.

We are located at Diamond House, 47-51 Mill Street, Ballymena.

adiars-300x225     adairs

Call in to Robert Adair Jewellers to get advice on buying diamonds.

 

In Diamonds, Rings, Uncategorized , , , , ,
permalink